Iscar adjustable Milling Cutters

Iscar recently made public a new family of High Speed Milling adjustable endmills and facemills that will expand milling of aluminum, non-metallics, cast iron and hardened steel. This should prove specifically useful in the automotive and aerospace industries.

The cutters are dynamically stabilized and precisely built to work with polycrystalline diamond (PCD) or cubic boron nitride (CBN) inserts. The use of these inserts will greatly increase surface finish. Regular HSM-rated HELIMILL carbide inserts will likewise work with these endmills. Internal coolant holes permit cooler cutting face with upgraded chip evacuation and built-up edge resistance. The insert pockets have a flexible rear stopper, allowing for axial positioning of the cutting edge within 0.002 mm.

Iscar's endmills designated E90AD are presented in HSK A63 shanks in 4 diameters starting from 25 to 50 mm. Iscar Facemills designated F90AD cover the 50 to 80 mm diameter range are offered in 4 sizes.

When implemented with Iscar HELIMILL carbide inserts, the adjustable high speed milling cutters deliver a smooth cutting action at low cutting forces. HELIMILL inserts' helical cutting edges slowly enter the work piece decreasing the impact load on the cutting face.

CHATTERFREE Solid Carbide Endmills

Iscar is increasing the extremely successful CHATTERFREE solid carbide 4 flute endmill family with the addition of smaller (3, 4 and 5 mm) and larger (25 mm) diameters. The latest solid carbide endmills are used for roughing and finishing operations. Due to their variable pitch they showcase amazing chatter dampening ability. These endmills are an wonderful answer for low power machines by increasing their material removal rate and reducing vibration. They can be utilized for full slot machining of up to 2XD with solid carbide endmills.

Iscar's CHATTERFREE endmills maximize material removal rate and decrease cycle time in most milling operations. Their unique ground geometry provides outstanding surface finish and prolonged tool life, while machining at high material removal rates.

New ID5 PCD and IB85 PCBN Tipped Milling Inserts

Iscar is adding a revolutionary TANGMILL ID5 PCD wiper insert and 2 HELIMILL inserts tipped with IB85 PCBN, for machining cast iron and a broad range of hard-to-machine materials at high cutting rates. The new LNAR 1106PN-R-S-W ID5 PCD tipped wiper insert has a extraordinarily large frontal radius and sharp cutting edge. It provides a uniform clean-cut edge and fantastic surface finish of less than Ra 0.3 µm. Iscar's new HELIMILL insert ADKW 1505 PDER IB85 has an IB85 PCBN brazed tip and can be used on 90 distinct milling cutters for semi-finishing and finish machining on cast iron. The insert includes a 0.8 mm corner radius and a honed cutting edge (0.03 mm). It can be used on the conventional F90AD...-SFR or the E90AD ...-HSK63-S axially adjustable milling tools.

By adjusting the axial position of the inserts, it is feasible to accomplish a 0.3-0.7 µm surface finish. IB85 is a fine grain polycrystalline cubic boron nitride grade. The small grain size enables grinding a extremely sharp cutting edge and achieving high surface quality, which provide excellent tool life. The IB85 grade can be used for machining a wide range of hard to machine metal at high cutting rates and provides exceptional tool life. IB85 contains 85% PCBN with Al Co and W binder.

It is a extraordinarily strong and tough material which can be implemented for heavy roughing and interrupted cuts. The array of materials covered by IB85 includes hardened and cast steel of over 45 HRc, grey and nodular cast iron, powder compacted and sintered metals as well as heat resistant alloys.

Iscar Adds Their Most Recent Innovations To A Extensive Line Of Successful Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Announces A Completely New Line Of Slitting Cutters Utilizing Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Completely New End Mills By Iscar Will Expand Productivity While Shrinking Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Push Pull Testing For Highway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Documentation To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Completely New Tools And Carbide Insert Arrangements From Iscar To Better The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

The Most Recent In Carbide Endmill Configuration In A Long And Outstanding Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.